It is common for consumers and even manufacturers to mix terms and call ZIF to an LIF connector, or LIF to a ZIF connector.
In fact on Wikipedia, at the time of reading it, it informs that most 1.8-inch hard drives (for notebook) uses LIF technology.It is not really common to see hard drives with LIF connector, most of these hard drives use ZIF connectors.
To distinguish between both cables:
0 cable, 25 mm deep=ZIF Cable 0.5 mm deep=LIF
Because of the use of ZIF: advantages over LIF
A typical socket of an integrated circuit requires that the circuit be pushed and adjusted by friction.For a circuit with hundreds of pins, the insertion force must be important, they could thus damaging the device or the circuit board.
Even on devices with few pins, each removal or placement of it can damage those contacts (for example, bend a pin).LIF socket technology (low insertion force (low insertion force) reduces this problem, but it can also produce a less reliable connection.
The LIF connector was initially designed to be a cheap alternative to the ZIF connector, which uses a more complex mechanism.LIF allows a lower friction and force between the contacts of the device and the insertion socket, which allows to reduce the insertion force.The disadvantage of the LIF connectors is that the grip force between contacts is lower, also the contacts can oxidize more fast and reduce the life of the connector.
LIF sockets were used in some types of 386s processor sockets and the first 486s, then replaced by ZIF sockets.
CPU ZIF sockets are found Normally on PC motherboards from the mid-1990s onwards, these CPU sockets are designed to support a particular range of microprocessor types, which allows merchants and buyers to assemble the most convenient motherboard/microprocessor.for your budget and requirements.
In general, the rest of the electronics industry has abandoned the sockets (of any type) to be replaced by surface mounting technology (assemble components by welding them directly on the board).
Questions? needs more information?
Write and we will respond to your email
Comments
Post a Comment